Alert Type
SRN - Software Release Notification
Risk
Risk Description
Low/Notification
Software Release Notification
Impact
Impact Description
Low/Notification
Software Release Notification
Product Affected
ACX, EX, MX, PTX, QFX, NFX, SRX, VRR, vMX, vSRX
Alert Description
Junos Software Service Release version 19.1R2-S3 is now available for download from the Junos software download site
Download Junos Software Service Release:
Go to
Junos Platforms - Download Software page
Input your product in the "Find a Product" search box
From the Type/OS drop-down menu, select
Junos SR
From the Version drop-down menu, select your version
Click the Software tab
Select the Install Package as need and follow the prompts
Solution
Junos Software service Release version 19.1R2-S3 is now available.
19.1R2-S3 - List of Fixed issues
PR Number
Synopsis
Category: EX2300/3400 platform
1535106
EX2300/EX3400 : RTC ERROR and SETTIME failed messages is seen
Product-Group=junos
On EX2300 and EX3400 series, you may observe RTC ERROR and SETTIME failed message sometimes without trigger.
PR Number
Synopsis
Category: Covers Application classification workflows apart from custo
1563280
The AppID DB not erased after 'request system zeroize'
Product-Group=junos
On all SRX platforms, the AppID DB not erased after 'request system zeroize'. It will not impact any traffic but customers might confuse due to this issue.
PR Number
Synopsis
Category: EA chip ( MQSS SW issues )
1556576
Junos OS: FPC may crash upon receipt of specific MPLS packet affecting Trio-based MPCs (CVE-2021-0288)
Product-Group=junos
If specific malformed MPLS packets are received, forwarding will stop on that Packet Forwarding Engine (PFE) and an MPC crash may result. Refer to https://kb.juniper.net/
JSA11190
[juniper.net]
for more information.
PR Number
Synopsis
Category: EX4400 platform
1573889
EX4400: Mgmt LEDs are not working as per expectations
Product-Group=junos
Below is the status of management LED when speed is set to: 1. 10m - Activity LED is not blinking when ping/traffic is runnig (instead it is remaining steady GREEN) 2. 100m - Activity LED is blinking without any ping/traffic.
PR Number
Synopsis
Category: Firewall Policy
1471621
The count option in the security policy does not take effect even if the policy count is enabled.
Product-Group=junos
On SRX Series devices that have a security policy counter deployed, the count option in the security policy might not work. As a result, issuing show security policies <> detail might not print traffic statistics for the security policy.
PR Number
Synopsis
Category: FreeBSD Kernel Infrastructure
1549754
While loading the kernel displays the following error message: GEOM: mmcsd0s.enh: corrupt or invalid GPT detected.
Product-Group=junos
While loading the kernel, user sees the message "GEOM: mmcsd0s.enh: corrupt or invalid GPT detected." This message has no impact on functionality.
1551193
VM might crash if file is shared between host operating system and guest operating system using virtFS
Product-Group=junos
On Virtual Machines (VM) based platforms running Junos images, file might not be shared between host operating system and guest operating system via Virtual Filesystem (virtFS). When this issue happens, device might be restarted.
1552952
The vme/me0 management interface cannot process any incoming packets.
Product-Group=junos
On EX2300/EX2300-MP/EX3400 platforms, when me0 interface is deleted and vme interface is configured, the device cannot process any incoming packet on vme/me0 management interface.
1555748
Devices might get stuck in "OK" prompt while loading the image.
Product-Group=junos
EX, MX, PTX & SRX series devices may stuck in the "OK" prompt while loading image for certain junos versions like 18.3R1, 21.1R1.
1563647
Memory corruption of any binary in /usr/bin/ or /usr/sbin/ may be triggered when a recovery snapshot is being copied to the OAM volume or system while it's in heavily stressed condition
Product-Group=junos
Memory corruption of a binary from /usr/bin/ or /usr/sbin/ directory can occur if such binary is invoked when a recovery snapshot creation is in progress. The exact symptoms will be different depending on the exact binary and JUNOS version - some programs will show an error, and some programs will crash every time it is executed. Such memory corruption will be persistent until the affected Routing Engine is restarted. Please refer to
TSB17954
[juniper.net]
(https://kb.juniper.net/
TSB17954
[juniper.net]
) for further details. In addition to recovery snapshot, a device reboot could also be a possible trigger when the system is under heavier read operations across the mounted packages.
1572963
The upgrading might fail when upgrading from Junos with FreeBSD 6
Product-Group=junos
On all platforms (For SRX, only SRX5k with RE-1800x4) while directly upgrading from Junos with FreeBSD 6 (e.g. 15.1X49 or before) to the affected releases, the system will check the USB connection. The upgrading will fail if there is no USB device detected during the upgrading process.
1602005
Upgrade might fail when upgrading from legacy release
Product-Group=junos
On all platforms (For SRX, only SRX5k with RE-1800x4) while directly upgrading from Junos with FreeBSD 6 (e.g. 15.1X49 or before) to the affected releases, the system will check the USB connection. The upgrading will fail if there is no USB device detected during the upgrading process.
PR Number
Synopsis
Category: TCP/UDP transport layer
1552603
The BGP session replication might fail to start after the session crashes on the backup Routing Engine.
Product-Group=junos
On certain Junos platforms with Dual-REs (platforms capable of installing Junos packages with name format as "junos*install"), BGP replication may fail to start under GRES/NSR setup after a crash on backup Routing Engine. NSR starts un-replicating the socket since backup Routing Engine is no longer present. Massive unreplicated request leads to memory buffer getting full with multiple BGP sessions (e.g., 20 BGP peers). Hence BGP unreplicated request returned with an error. Besides, the kernel is left with stale data. It does not allow the JSR (Juniper Socket Replication, BGP in this case) when backup RE comes up due to the stale data. BGP-NSR (Nonstop Routing) is broke under the conditions. Traffic outage will be observed after performing GRES.
PR Number
Synopsis
Category: RPD route tables, resolver, routing instances, static routes
1412977
Junos OS: RPD crash while processing a specific BGP UPDATE when Multipath or add-path features are enabled (CVE-2021-0282)
Product-Group=junos
On Juniper Networks Junos OS devices with Multipath or add-path feature enabled, processing a specific BGP UPDATE can lead to a routing process daemon (RPD) crash and restart, causing a Denial of Service (DoS). Continued receipt and processing of this UPDATE message will create a sustained Denial of Service (DoS) condition. Refer to https://kb.juniper.net/
JSA11186
[juniper.net]
for more information.
PR Number
Synopsis
Category: SW PRs for SCBE3 related kernel drivers
1564539
MX platforms with MX-SCBE3 may reboot continuously
Product-Group=junos
A recent change in the kernel boot loader causes a system with MX-SCBE3 to experience the Routing Enginne's kernel memory corruption which causes the system to reboot continuously.
PR Number
Synopsis
Category: UI Infrastructure - mgd, DAX API, DDL/ODL
1553577
The request system software validate on host command does not validate the correct configuration file.
Product-Group=junos
When using the "request system software validate on host username ", please use the latest os-package on remote host for it to properly use the configuration file sent from the host whose configuration file is being validated.
19.1R2-S3 - List of Known issues
PR Number
Synopsis
Category: Express PFE FW Features
1432116
The FPC might crash when a firewall filter is modified.
Product-Group=junos
In QFX10K/PTX series platforms, if a firewall filter with multiple match conditions is configured on interfaces which are Up and the firewall filter is modified (either a new action is added or the condition is added/removed etc.), the FPC might crash and restart. It might affect the service/traffic.
PR Number
Synopsis
Category: FreeBSD Kernel Infrastructure
1579331
EX4400: Under some conditions, the FPGA reset reason may be incorrectly shown in console logs as 0.
Product-Group=junos
EX4400: Under some special conditions, such as boot from OAM volume following a graceful/warm reboot, the FPGA reset reason incorrectly shown in console logs as 0.
PR Number
Synopsis
Category: PTX Broadway based PFE MPLS-LSPs RSVP VPNs tcc ccc software
1466659
IPv6 traffic might be dropped in a Layer 3 VPN network.
Product-Group=junos
On certain PTX and QFX platforms, IPv6 traffic might get affected in the L3VPN scenario between CEs.
Modification History
First publication 2021-09-27
19.1R2-S3: Software Release Notification for JUNOS Software Version 19.1R2-S3