Alert Type
SRN - Software Release Notification
Product Affected
ACX, EX, MX, PTX, QFX, NFX, SRX, VRR, vMX, vSRX
Alert Description
Junos Software Service Release version 19.1R1-S5 is now available for download from the Junos software download site
Download Junos Software Service Release:
Go to
Junos Platforms - Download Software page
Input your product in the "Find a Product" search box
From the Type/OS drop-down menu, select
Junos SR
From the Version drop-down menu, select your version
Click the Software tab
Select the Install Package as need and follow the prompts
Solution
Junos Software service Release version 19.1R1-S5 is now available.
19.1R1-S5 - List of Fixed issues
PR Number
Synopsis
Category: EX2300/3400 platform
1477165
EX3400 me0 interface might remain down
Product-Group=junos
The me0 interface of EX3400 does not come up when connected to 100m speed interface.
PR Number
Synopsis
Category: Pinnacle Hardware
1457516
QFX5110s switches port 51 has 1 led blinking amber
Product-Group=junos
One of the LEDs on port 51 on QFX5110s is blinking amber continuously. This caused by the PTP inadvertently access port 51 instead of limiting its access to only port 52 and 53. The fix is to correct the PTP process to only use port 52 and 53
PR Number
Synopsis
Category: Border Gateway Protocol
1487691
High CPU utilization might be observed when the outgoing BGP updates are sending slowly
Product-Group=junos
On all Junos platforms with the BGP routing protocols, the rpd process might go into a high CPU utilization causing slow network convergence. If a BGP peer is receiving and processing BGP updates slowly, this may cause the BGP output queue of the sending BGP peer to be full. When the queue is full it causes high CPU utilization of the BGP IO thread (bgpio, it is part of the rpd daemon) on the sending BGP peer. This defect could cause network-wide slow BGP network convergence. (See also https://kb.juniper.net/
TSB17725
[juniper.net]
)
PR Number
Synopsis
Category: Security platform jweb support
1499280
Junos OS: Security vulnerability in J-Web and web based (HTTP/HTTPS) services
Product-Group=junos
Junos OS: Security vulnerability in J-Web and web based (HTTP/HTTPS) services (CVE-2020-1631). Refer to https://kb.juniper.net/
JSA11021
[juniper.net]
for more information.
PR Number
Synopsis
Category: vMX Platform Infrastructure related issue tracking
1491662
vFPC becomes unresponsive following reboot of vMX
Product-Group=junos
i40evf stack trace "i40evf_free_all_rx_resources" is seen and FPC becomes unresponsive resulting in packet loss.
PR Number
Synopsis
Category: VMX wrlinux changes
1475381
TCP-MSS is not working for LNS subscriber and IP traffic in MX150
Product-Group=junos
When TCP-MSS is configured on Dynamic-Profile or enabled for plain IP traffic, only the initial SYN packet will be marked correct with configured TCP-MSS rest SYNC packets will not be marked correctly.
PR Number
Synopsis
Category: Interface related issues. Port up/down, stats, CMLC , serdes
1388591
Error message "portmod_port_core_access_get: Invalid parameter" seen in log messages
Product-Group=junos
QFX5110 has both internal and external PHYs. The procedure to read FEC statistics from external Phys is different from the one used to read from internal phys. On using the APIs meant for internal PHYs on external PHYs, error messages are displayed.
PR Number
Synopsis
Category: QFX platform optics related issues
1430115
Interface on QFX does not come up after the transceiver is replaced with one having different speed
Product-Group=junos
On QFX series platforms, interface may not come up when the transceiver is replaced with another transceiver which has different speed.
PR Number
Synopsis
Category: QFX PFE Class of Services
1476829
QFX Platforms are exhibiting invalid PFE PG counter pairs to copy, src 0xfffff80, dst 0
Product-Group=junos
On QFX Series Switches one may see "invalid PFE PG counter pairs" errors might be displayed as a result of polling class of service-related SNMP OIDs. These messages might eventually lead to interface counters not being populated properly.
19.1R1-S5 - List of Known issues
PR Number
Synopsis
Category: NFX Series Platform Software
1493062
[jdm] [nfx3] NFX250 :: CLI command "request vmhost power-off" reboots the device instead of power off on NFX250 operating nfx3 image
Product-Group=junosvae
CLI command "request vmhost power-off" reboots the device instead of power off on NFX250 operating nfx3 image for 19.4R1
PR Number
Synopsis
Category: Flow Module
1465944
Junos OS: High-End SRX Series: Multicast traffic might cause all FPCs to reset. (CVE-2020-1634)
Product-Group=junos
On High-End SRX Series devices, in specific configurations and when specific networking events or operator actions occur, an SPC receiving genuine multicast traffic may core. Refer to https://kb.juniper.net/
JSA11014
[juniper.net]
for more information.
PR Number
Synopsis
Category: Layer 2 Control Module
1505710
AUTO-CORE-PR : JDI RPD REGRESSION : L2CPD core found @ erp_add_restart_perst_stp_inst_info pmem_walk erp_build_restart_perst_stp_inst_info
Product-Group=junos
This core will be seen if you have added/deleted ERP config multiple times and then restarted l2cpd or rebooted the box. When this issue is hit, l2cpd will not recover again and it would be coring continuously.
PR Number
Synopsis
Category: IPv6/ND/ICMPv6 issues
1439844
DHCPv6 relay binding is not up when integrated routing and bridging(IRB) interface enabling DHCPv6 Snooping and Neighbor Discovery Inspection (NDI) simultaneously on EX9200
Product-Group=junos
In DHCPv6 relay scenario, when DHCPv6 snooping and NDI enable simultaneously on IRB interface on EX9200, DHCPv6 relay binding is not up.
Modification History
First publication 2020-05-21
19.1R1-S5: Software Release Notification for JUNOS Software Version 19.1R1-S5