Alert Type

SRN - Software Release Notification
Low/NotificationSoftware Release Notification
Low/NotificationSoftware Release Notification

Product Affected

ACX, EX, MX, PTX, QFX, NFX, SRX, VRR, vMX, vSRX

Alert Description

Junos Software Service Release version 19.4R1-S1 is now available for download from the Junos software download site
Download Junos Software Service Release:
  1. Go to  Junos Platforms - Download Software page
  2. Input your product in the "Find a Product" search box
  3. From the Type/OS drop-down menu, select  Junos SR
  4. From the Version drop-down menu, select your version
  5. Click the Software tab
  6. Select the Install Package as need and follow the prompts

Solution

Junos Software service Release version 19.4R1-S1 is now available.

19.4R1-S1 - List of Fixed issues
PR Number Synopsis Category: EX2300/3400 platform
1477165 EX3400 me0 interface might remain down
Product-Group=junos 		The me0 interface of EX3400 does not come up when connected to 100m speed interface.
PR Number Synopsis Category: NFX Series Platform Software
1458554 Static MAC address getting replaced by random MAC.
Product-Group=junosvae 		In 19.2R1, the device will not take the statically assigned MAC address from the CLI configuration. This is fixed in junos:19.2R2 junos:19.3R3 junos:19.4R2 junos:20.1R1. This issue was caused by an issue with the intel drivers.
1459885 VMhost mapping changes for a particular NIC should be done by first deleting the vmost mapping and then configuring the new mapping
Product-Group=junosvae 		On NFX150 devices, when you need to change the vmhost mappings of a particular NIC or NICs, you must delete the existing vmhost mapping and commit the configuration. Now you can configure the new mappings for the respective NICs. You cannot change the NIC vmhost mappings in the same commit to delete and add a new mapping to the heth NICs.
1478456 NFX350: VNF Instantiation using XMl with interfaces mapped to VF doesn't work.
Product-Group=junosvae 		If a VNF is spawned using XML and the XML has interfaces with mapping to Virtual functions then the VNF will not come up.
PR Number Synopsis Category: QFX ISSUE PFE related
1472183 ISSU will not be supported for QFX5K for some versions
Product-Group=junos 		On QFX5K platforms, during unified ISSU from previous releases to some Junos OS Release (19.2R1-S1, 19.4R1 and so on.), dcpfe will crash continuously and hence ISSU will not work.
PR Number Synopsis Category: QFX PFE L2
1467466 Few MAC addresses might be missing from MAC table in software on QFX5k platform.
Product-Group=junos 		On QFX5k platform, if Packet Forwarding Engine process is restarted manually or device reboot occurs, some MAC address(es) might not be seen on software MAC table but MAC address will be present in hardware table.
PR Number Synopsis Category: This is for Hw & Sw issues which are special for SPC3 car
1479001 When SRX5K-SPC3s or MX-SPC3s are installed in slots 0 or 1 in a SRX5800 or MX960 chassis, EMI radiated emissions are observed to be higher than regulatory compliance requirements
Product-Group=junos 		When SRX5K-SPC3s or MX-SPC3s are installed in slots 0 or 1 in a SRX5800 or MX960 chassis, EMI radiated emissions are observed to be higher than regulatory compliance requirements
PR Number Synopsis Category: Border Gateway Protocol
1487691 High CPU utilization might be observed when the outgoing BGP updates are sending slowly
Product-Group=junos 		On all Junos platforms with the BGP routing protocols, the rpd process might go into a high CPU utilization causing slow network convergence. If a BGP peer is receiving and processing BGP updates slowly, this may cause the BGP output queue of the sending BGP peer to be full. When the queue is full it causes high CPU utilization of the BGP IO thread (bgpio, it is part of the rpd daemon) on the sending BGP peer. This defect could cause network-wide slow BGP network convergence. (See also https://kb.juniper.net/TSB17725 [juniper.net])
PR Number Synopsis Category: MX Platform SW - FRU Management
1463169 The RE switchover may not be triggered when the primary CB clock failure
Product-Group=junos 		On the specific Junos platforms, the RE switchover may not be triggered when the primary CB clock failure is detected. The primary CB with faulty clock can't operate normally and this issue may cause fabric plane failure.
PR Number Synopsis Category: L2NG Access Security feature
1478375 The process dhcpd may crash in a Junos Fusion environment
Product-Group=junos 		On EX92XX platforms with the DHCP snooping configured, if a peer receives DHCPv6 packets from the server without the "client-id" option present, and it is syncing packets to the other side at that time, then the process dhcpd crash may be observed.
PR Number Synopsis Category: OpenSSH and related subsystems
1475255 EVO: sftp does not connect properly: "Received message too long" error
Product-Group=junos 		Due to issues with the way ssh subsystems are handled, SFTP (services ssh secure-ftp) does not function properly under Evo
PR Number Synopsis Category: Express PFE L2 fwding Features
1474876 The input-vlan-map/output-vlan-map might not work properly in L2circuit local-switching scenario
Product-Group=junos 		On PTX1K/PTX10K platforms, in L2circuit local-switching scenario, when vlan-ccc encapsulation is configured with input-vlan-map/output-vlan-map, all traffic passing through might have unexpected vlan manipulation (vlan tag push/pop/swap).
PR Number Synopsis Category: Platform infra to support jvision
1479642 JDI_TPTX_REG_Observe the core "mib2d.core-tarball" verifying the onchange functionality.
Product-Group=junos 		mib2d will core while deleting channelised interfaces.
PR Number Synopsis Category: Layer 2 Control Module
1478157 "show evpn statistics instance" command gets stuck on multihomed scenario.
Product-Group=junos 		"show evpn statistics instance" command gets stuck on multihomed scenario. The command shall give proper output but will not terminate and only time out. Ctrl+C can be used to exit the command immediately.
PR Number Synopsis Category: Label Distribution Protocol
1474204 LDP/BFD sessions are not coming up in scaled setup
Product-Group=junos 		On MPC10/MPC11 line card, the LDP/BFD sessions are dropped when the fast-lookup-filter has a default term with only accept as action and it is attached to the lo0 interface.
PR Number Synopsis Category: mc-ae interface
1479012 MC-AE interface may be shown as unknown status if adding the sub-interface as part of the VLAN on the peer MC-AE node
Product-Group=junos 		If adding the sub-interface as part of the VLAN on the peer MC-AE node while its corresponding MC-AE interface is still not configured to be part of the VLAN, the status of the MC-AE interface might be shown as unknown. It might have an impact on the traffic as the colour of the MC-AE interface could not be updated correctly.
PR Number Synopsis Category: FreeBSD Kernel Infrastructure
1442376 EX2300 platforms might stop forwarding traffic or responding to console
Product-Group=junos 		On EX2300/EX2300-C platforms, if Junos OS is with FreeBSD kernel version 11 with the build date on or after 2019-02-12, the switch might stop forwarding traffic or responding to console. A reboot is required to restore the service.
1454950 EX switches might not come up properly upon reboot
Product-Group=junos 		EX switches might not come up properly upon reboot due to the date not been set up
1469400 EX3400 might reboot because of lack of watchdog patting
Product-Group=junos 		On EX3400, if watchdog pat did not happen within stipulated time and it might reboot automatically with "0x2:watchdog" as reboot reason.
PR Number Synopsis Category: OSPF routing protocol
1452118 The TI-LFA backup path for adj-sid is broken in OSPF
Product-Group=junos 		The TI-LFA (Topology-Independent Loop-Free Alternate) backup path for adj-sid is broken in OSPF where the shortest path to the node opposite the adj-sid is not the one hop path over the interface indicated by the adj-sid. If the backup path is broken when the primary path fails, it will cause traffic loss.
PR Number Synopsis Category: Filters
1472206 QFX5K: Egress PACL size will be half in 19.4R1
Product-Group=junos 		Because of change in new SDK, egress filter's slice usage will be double and these will be only 512 entries in Junos OS Release 19.4R1. This will be fixed in R2.
1472206 QFX5K: Egress PACL size will be half in 19.4R1
Product-Group=junosvae 		Because of change in new SDK, egress filter's slice usage will be double and these will be only 512 entries in Junos OS Release 19.4R1. This will be fixed in R2.
PR Number Synopsis Category: QFX L2 PFE
1475430 There might be traffic drop on QFX5110/5120 switches acting as leaf switch in a multicast environment with VxLAN
Product-Group=junos 		In a multicast environment where IGMP-snooping is enabled with VxLAN and QFX5110/5120 switches act as leaf switch, there might be traffic drop as the switch might fail to forward the traffic to Assisted Replicator (AR-replicator)/Spines when BGP is flapped on Spine switch. This is a rare issue noticed when the route installation messages are received out-of-order on leaf switch.
PR Number Synopsis Category: Trio pfe bridging, learning, stp, oam, irb software
1467764 The Layer-2 traffic over ae interfaces sent from one member to another is corrupted on MX-VC setup
Product-Group=junos 		On MX-VC setup with bridge-domains configured, if ae interface is used within bridge-domain, and if the ingress ae and egress ae interface host in different VC members, the Layer-2 traffic over ae sent from one member to another is getting corrupted.
 

Modification History

2022-03-23: non-technical changes; corrected formatting issue
2020-03-16: First publication