ISSUE:
 
After Upgrade of switches over Apstra from Junos 22.2R3-S3.18 to Junos 22.2R3-S4.10 there are problems with license on the switches:
 
 
4 alarms currently active
Alarm time Class Description
2024-09-25 12:31:10 CEST Minor EVPN-VXLAN feature(262) usage requires a license
2024-09-25 12:31:10 CEST Minor VxLAN(164) usage requires a license
2024-09-25 12:31:10 CEST Minor BGP Routing Protocol(47) usage requires a license
2024-09-25 12:29:10 CEST Minor Rescue configuration is not set
 
netadmin@leaf-01-dcf1-sr1-rdc> show system license
License usage:
Licenses Licenses Licenses
Feature Feature Feature
Feature name used installed needed Expiry
bgp 1 0 1 invalid
filter-based-forwarding 0 1 0 permanent
connectivity-fault-management 0 1 0 permanent
vrrp 0 1 0 permanent
dot1q-tunneling 0 1 0 permanent
vxlan 1 0 1 invalid
mc-lag 0 1 0 permanent
Timing License 0 1 0 permanent
evpn-vxlan 1 0 1 invalid
igmp-multicast 0 1 0 permanent
pim 0 1 0 permanent
gre_tunnel 0 1 0 permanent
rip 0 1 0 permanent
ospf 0 1 0 permanent
switching-vc-license 0 1 0 permanent
inmon-sflow 0 1 0 permanent
 
Licenses installed: none
 
License key is configured in the switch with the below set command:
 
set system license keys key "JUNOS277710038 aeaqia qmlbed gnzsge 2tambt gyyqmj uba2as kwmbd6 aqouea 66arra izqeni b64a7s aqbaie lvpibj ea7waq wmbpqe layh2s ifeumr sfjfju ktrajf hemt2s jvavis klebdu 2qsiea tcaq2p a4uljh x4ap7s odmkim pemrsb rvrbna fxllc6 gyz5wb qj3jfe hw3jgj jwhtwx woyxsc sop4i"
 
 
Deleting and re-applying the above mentioned "set" command , installs the license without any issues .
When we try to install the license using " request system license add?" command, there is no issue.

ANALYSIS:
 
No issues were observed when upgrading via CLI, but problems arise when upgrading through Apstra..
It appears there may be an issue with how Apstra uses load override to re-apply configurations .
This issue has also been successfully replicated in the lab.

the issue will be resolved in junos:23.4R2 junos:24.1R1 junos:24.2R1

version 1