Description

When a RE-S-2X00x6 slotted in SCB3E, sometimes it gets stuck in boot loop.

 

Routing Engine 0 REV 27  750-054758  CAPCXXXX         RE-S-2X00x6
Routing Engine 1 REV 17  740-013063  900914XXXX       RE-S-2000
CB 0             REV 40  750-070866  EBAYXXXX          
CB 1             REV 19  750-031391  ABCXXXX          Enhanced MX SCB
CB 2             REV 19  750-031391  ABCH0XXXX        Enhanced MX SCB

Symptoms

Sometimes while installing the new RE (RE-S-2X00x6) in SCB3E, RE gets stuck in boot loop. The below boot log messages will be noticed:

 

error: no suitable video mode found.

Booting in blind mode

setpci: Unable to parse filter -s Invalid function number.

Try `setpci --help' for more information.

Cannot get kernel page_offset_base symbol address

Cannot get kernel _stext symbol address

VMHost crash kernel loaded at reserved memory

Current Boot: Boot0005* EFI Hard Drive (SFSA200GV3AA4TO-I-HC-246-JUN)

detected current boot medium.. ssd

Starting file system check on rootfs

fsck from util-linux 2.28.1

e2fsck 1.43 (17-May-2016)

jrootp_P: clean, 28062/131072 files, 382449/524288 blocks

fsck from util-linux 2.28.1

e2fsck 1.43 (17-May-2016)

jrootp_P: clean, 28062/131072 files, 382449/524288 blocks

mount: mount point /temp/psystemd[1]: [/etc/systemd/system/reboot.target.d/override.conf:2] Failed to parse JobTimeoutSec= parameter, ignoring: 

ip_local_port_range: prefer different parity for start/end values.

get_fpga_base_addr: RE-FPGA-DRV: Got the Base address 0xfed50000

uio_fpga_probe: RE-FPGA-DRV: Got the Base address 0xfed50000

RE-FPGA-DRV: RE FPGA type default

sh[2349]:  4 logical volume(s) in volume group "jvg_P" now active

sh[2349]:  4 logical volume(s) in volume group "jvg_S" now active

sh[2349]:  Reading volume groups from cache.

sh[2349]:  Found volume group "jvg_P" using metadata type lvm2

sh[2349]:  Found volume group "jvg_S" using metadata type lvm2

sh[2349]: Cleaned RW Root, proceeding...

Creating VFs...

/etc/createvfs: line 23: echo: write error: Function not impleme01:00.0

01:00.1

AER: PCI device of CB FPGA not found

Solution

Drain the power of the complete chassis, connect the new RE-S-2X00x6 in SCB3E and boot the whole chassis. 

Modification History

2024-10-08 : Article Created