Description

This article explains the basic configuration required for SNMP v2 to work.

Solution

Following configuration can be applied on the device:

 

#set snmp name <JUNIPER-SNMP>
#set snmp description <“Juniper SNMP”>
#set snmp location <Datacentre>
#set snmp view all oid .1
#set snmp community <community-name> view all
#set snmp community <community-name> authorization ready-write
#set snmp community <community-name> clients 10.3.x.x/32


Traps Configuration:

#set snmp trap-group <group-name> version v2
#set snmp trap-group <group-name> targets <server-ip>

The below commands are optional and can be configured as per customer's requirement:
#set snmp trap-options source-address <Source IP address>
#set snmp trap-options agent-address outgoing-interface
#set snmp trap-group <SNMPGROUP> destination-port 162
#set snmp trap-group <SNMPGROUP> categories authentication
#set snmp trap-group <SNMPGROUP> categories chassis
#set snmp trap-group <SNMPGROUP> categories configuration

Modification History

2024-05-14: Article validated
2024-05-02 : Article Created

Related Information

Configure Basic SNMP | Junos OS | Juniper Networks