Description

Enable or disable the generation of PoE SNMP traps. If PoE SNMP traps are enabled, an SNMP trap is sent whenever a PoE interface is enabled or disabled.​    

Symptoms

The following log messages are generated when notification-control is configured for PoE. 

chassisd[3501]: CHASSISD_SNMP_TRAP1: SNMP trap generated: FPC:0 Port is off while Power < Threshold (pethMainPseConsumptionPower 10)
chassisd[3501]: CHASSISD_SNMP_TRAP1: SNMP trap generated: FPC:0 Port is off while Power < Threshold (pethMainPseConsumptionPower 10)
chassisd[3501]: CHASSISD_SNMP_TRAP1: SNMP trap generated: Now Port:ge-0/0/16 is in other fault state (pethPsePortDetectionStatus 6)
chassisd[3501]: CHASSISD_SNMP_TRAP1: SNMP trap generated: FPC:0 Port is off while Power < Threshold (pethMainPseConsumptionPower 10)
chassisd[3501]: CHASSISD_SNMP_TRAP1: SNMP trap generated: Now Port:ge-0/0/2 is in other fault state (pethPsePortDetectionStatus 6)
chassisd[3501]: CHASSISD_SNMP_TRAP1: SNMP trap generated: Now Port:ge-0/0/4 is in other fault state (pethPsePortDetectionStatus 6)
chassisd[3501]: CHASSISD_SNMP_TRAP1: SNMP trap generated: Now Port:ge-0/0/16 is in searching state (pethPsePortDetectionStatus 2)
chassisd[3501]: CHASSISD_SNMP_TRAP1: SNMP trap generated: Now Port:ge-0/0/47 is in searching state (pethPsePortDetectionStatus 2)

Solution

To avoid these messages, deactivate the notification-control (deactivate poe notification-control) or filter out the specific logs using syslog filter conditions.

To suppress repeating non-impacting messages refer to KB9382 - How to prevent certain syslog messages from being written to the log file [juniper.net]