This article provides links to the Windows 10 and MAC drivers that are used for USB console access to the Juniper Networks System Console on the following platforms:
SRX300
SRX320
SRX340
SRX345
SRX550M
SRX1500
The USB drivers for Windows 7 and Window 10 operating systems may be obtained from the Silicon Labs Knowledge Base by using the following link:
https://www.silabs.com/community/interface/knowledge-base.entry.html/2016/08/19/drivers_for_juniper-WkA6
Updated drivers, including support for Windows 8/8.1, may be obtained from the Silicon Labs download page from the following link:
https://www.silabs.com/documents/public/software/CP210x_Windows_Drivers.zip
To install the driver, unzip the appropriate file and double-click the CP210xVCPInstaller.exe executable.
This USB driver includes support for Macintosh OSX for Intel and PowerPC platforms versions 10.5, 10.6, 10.7, 10.8, 10.9, 10.10, and 10.11.
The MacOS USB Driver is available at: https://www.silabs.com/documents/public/software/Mac_OSX_VCP_Driver.zip.
Driver Installation: Mount the DMG file and double-click the Silicon Labs VCP Driver.
Consolidated USB driver information for various platforms can be found at the Silicon Labs site: https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers.
2018-01-10: Silabs changed the download links. Article was updated with the current active links for the USB driver download for console access.
2023-01-17: Article was updated with the official downloads link on Silicon Labs.
2023-02-02: Article reverted to version per request