This article describes the issue of the rows not being correctly aligned in the output of monitor interface <int> , when the flexible-ethernet-services encapsulation is used.

When performing monitor interface <interface> on interfaces, which are configured with flexible-ethernet-services (L2circuit and L2VPN) encapsulation, the rows displaying the statistics for Current delta are not correctly aligned, with the corresponding traffic statistics. Current delta is displayed one row higher:

Interface: et-2/0/5, Enabled, Link is Up
Encapsulation: Flexible-Ethernet-Services, Speed: 10000mbps
Current delta
Traffic statistics: [602] <*******
Input bytes: 8184566 (2352 bps) [984]
Output bytes: 5860876 (3840 bps) [7]
Input packets: 98790 (0 pps) [12]
Output packets: 72679 (0 pps)
Error statistics: [0]
Input errors: 0 [0]
Input drops: 0 [0]
Input framing errors: 0 [0]
Policed discards: 0 [0]
L3 incompletes: 0 [0]
L2 channel errors: 0 [0]
L2 mismatch timeouts: 0 [0]
Carrier transitions: 19 [0]
Output errors: 0 [0]
Output drops: 0 [0]
Aged packets: 0
Active alarms : None
Active defects: None
Input MAC/Filter statistics: [0]
Unicast packets 3875 [0]
Broadcast packets 3894 [8]
Multicast packets 91025 [0]
Oversized frames 0 [0]
Packet reject count 0 [0]
DA rejects 0 [0]
SA rejects 0
Output MAC/Filter Statistics: [0]
Unicast packets 0 [0]
Broadcast packets 3881 [12]
Multicast packets 68805 [0]
Packet pad count 0 [0]
Packet error count 0

This issue has been resolved in 12.1R3, 11.4R4, and 12.2R1.