Description

How to check the peer identifier, bgp state, local address by using SNMP MIBs.  The bgpPeerTable gives us information about the Peer identifier, bgpstate, local address, Adminstatus, BGP peer state, BGP peer Updates, BGP holddown time, etc.

Symptoms

SNMP OID's for BGP monitoring




Solution

From the configuration prompt, execute the below mentioned command to get the snmp values:

Below is a full sample showing how to retrieve identifier, state, admin status, etc.

[edit protocols bgp]
root# run show snmp mib walk bgpPeerTable

root#run snmp mib walk bgppeertable

bgpPeerIdentifier.10.1.1.1 = 10.1.1.1
bgpPeerState.10.1.1.1 = 6
bgpPeerState.10.1.1.1 = 6
bgpPeerAdminStatus.10.1.1.1 = 2
bgpPeerNegotiatedVersion.10.1.1.1 = 4
bgpPeerLocalAddr.10.1.1.1 = 10.1.1.2
bgpPeerLocalPort.10.1.1.1 = 65191
bgpPeerRemoteAddr.10.1.1.1 = 10.1.1.1
bgpPeerRemotePort.10.1.1.1 = 179
bgpPeerRemoteAs.10.1.1.1 = 10
bgpPeerInUpdates.10.1.1.1 = 2
bgpPeerOutUpdates.10.1.1.1 = 0
bgpPeerInTotalMessages.10.1.1.1 = 84
bgpPeerOutTotalMessages.10.1.1.1 = 87
bgpPeerLastError.10.1.1.1 = 06 06
bgpPeerFsmEstablishedTransitions.10.1.1.1 = 2
bgpPeerFsmEstablishedTime.10.1.1.1 = 1124
bgpPeerConnectRetryInterval.10.1.1.1 = 32
bgpPeerHoldTime.10.1.1.1 = 90
bgpPeerKeepAlive.10.1.1.1 = 30
bgpPeerHoldTimeConfigured.10.1.1.1 = 90
bgpPeerKeepAliveConfigured.10.1.1.1 = 30
bgpPeerMinASOriginationInterval.10.1.1.1 = 1
bgpPeerMinRouteAdvertisementInterval.10.1.1.1 = 1
bgpPeerInUpdateElapsedTime.10.1.1.1 = 1124