This document tracks the following logs:

fpc0 [TVP-PIC-BCM] tvp_bcm_mgig_phy_link_status broadfin phy port 0/14 not initialized
dc-pfe[xxxxx]: [TVP-PIC-BCM] tvp_bcm_mgig_phy_link_status broadfin phy port 0/14 not initialized
fpc0 [TVP-PIC-BCM] tvp_bcm_mgig_phy_link_status broadfin phy port 0/15 not initialized
dc-pfe[xxxxx]: [TVP-PIC-BCM] tvp_bcm_mgig_phy_link_status broadfin phy port 0/15 not initialized
fpc0 [TVP-PIC-BCM] tvp_bcm_mgig_phy_link_status broadfin phy port 0/12 not initialized
fpc0 [TVP-PIC-BCM] tvp_bcm_mgig_phy_link_status broadfin phy port 0/13 not initialized
fpc0 [TVP-PIC-BCM] tvp_bcm_mgig_phy_link_status broadfin phy port 0/10 not initialized
dc-pfe[xxxxx]: [TVP-PIC-BCM] tvp_bcm_mgig_phy_link_status broadfin phy port 0/12 not initialized

These logs may print periodically, however, no visual or noticeable impact reported.

These logs are generated by PFE, responsible for periodically polling link and health status on the switch's multi-gigabit PHY chip (typically a 15 port range).

In most cases, this message is cosmetic. It typically occurs when the driver queries ports that are currently unlinked, unused, or administratively disabled, reporting that the PHY channel is not initialized. It should not affect active traffic on other ports or switch performance.

They can be filtered out off the logs if desired.