This article explains what "cscript: %DAEMON-6: power consumption running" log means and when it is generated
The logs refer to the execution of the node power consumption monitoring script named get_power_usage.slax located in /var/db/scripts/event/. The script prints the logs below, confirming the node's current total power usage. These logs are informative and non-service-impacting:
Mar 17 18:23:39 device cscript: %DAEMON-6: power: 624 --> referes to current power consumption
Mar 17 18:27:13 device xntpd: %NTP-5: kernel time sync enabled 6001
Mar 17 18:28:38 device cscript: %DAEMON-6: power consumption running
Mar 17 18:28:39 device cscript: %DAEMON-6: power: 612 --> referes to current power consumption
Verified node health wrt to power, and the node was not starved of power. This chassis has only one active FPC and 3 working PEMs, and there were no active alarms except PEM 1 & 5 failure:
user@device> show chassis alarms
No alarms currently active
user@device> show chassis fpc
Temp CPU Utilization (%) CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt 1min 5min 15min DRAM (MB) Heap Buffer
0 Online 62 19 0 19 19 19 3168 13 23
user@device> show chassis environment pem
PEM 1 status:
State Offline
Health check Information:
Status: Unsupported
PEM 5 status:
user@device> show chassis power
PEM 1:
State: Offline
Input: Absent
PEM 5:
System:
Zone 0:
Capacity: 4400 W (maximum 4400 W)
Allocated power: 1255 W (3145 W remaining)
Actual usage: 612 W
Total system capacity: 4400 W (maximum 4400 W)
Total remaining power: 3145 W