An Improper Check or Handling of Exceptional Conditions within the storm control feature of Juniper Networks Junos OS allows an attacker sending a high rate of traffic to cause a Denial of Service. Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition.
Storm control monitors the level of applicable incoming traffic and compares it with the level specified. If the combined level of the applicable traffic exceeds the specified level, the switch drops packets for the controlled traffic types.
This issue affects Juniper Networks Junos OS on QFX10002:
The following provides an example of an affected configuration:
set interfaces xe-0/0/14:0 unit 0 family ethernet-switching interface-mode trunk
set interfaces xe-0/0/14:0 unit 0 family ethernet-switching vlan members v100
set interfaces xe-0/0/14:0 unit 0 family ethernet-switching storm-control storm
set forwarding-options storm-control-profiles default all
set forwarding-options storm-control-profiles storm all bandwidth-level 100
set forwarding-options storm-control-profiles storm action-shutdown
set protocols lldp interface all
set vlans v100 vlan-id 100
Juniper SIRT is not aware of any malicious exploitation of this vulnerability.
This issue was found during internal product security testing or research.
This issue has been assigned CVE-2023-28965.
The following software releases have been updated to resolve this specific issue: 19.3R3-S7, 19.4R3-S11, 20.2R3-S6, 20.4R3-S5, 21.1R3-S4, 21.2R3-S3, 21.3R3, 21.4R2, 22.1R1 and all subsequent releases.
This issue is being tracked as 1619359
Note: Juniper SIRT's policy is not to evaluate releases which are beyond End of Engineering (EOE) or End of Life (EOL).
There are no known workarounds for this issue.
2023-04-12: Initial Publication.