Article Detail

Product Affected

These issues affect all versions of SBR Carrier prior to 8.5.0-R17.

Severity

High

Severity Assessment (CVSS) Score

7.5 (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

Problem

Multiple vulnerabilities in OpenSSL, Kerberos, Expat, and OpenLDAP have been resolved in the Juniper Networks Steel-Belted Radius (SBR) Carrier AAA (Authentication, Authorization, and Accounting) server.

These issues affect:

Juniper Networks SBR Carrier:

all versions prior to 8.5.0-R17;
8.6.0 versions prior to 8.6.0-R12.

Juniper SIRT is not aware of any malicious exploitation of this vulnerability.

Important security issues resolved include:

CVE	CVSS	Summary
CVE-2018-0732	7.5 ( CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H )	During key agreement in a TLS handshake using a DH(E) based ciphersuite a malicious server can send a very large prime value to the client. This will cause the client to spend an unreasonably long period of time generating a key for this prime resulting in a hang until the client has finished. This could be exploited in a Denial Of Service attack. Fixed in OpenSSL 1.1.0i-dev (Affected 1.1.0-1.1.0h). Fixed in OpenSSL 1.0.2p-dev (Affected 1.0.2-1.0.2o).
CVE-2018-20217	5.3 ( CVSS:3.0/AV:N/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H )	A Reachable Assertion issue was discovered in the KDC in MIT Kerberos 5 (aka krb5) before 1.17. If an attacker can obtain a krbtgt ticket using an older encryption type (single-DES, triple-DES, or RC4), the attacker can crash the KDC by making an S4U2Self request.
CVE-2018-20843	7.5 ( CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H )	In libexpat in Expat before 2.2.7, XML input including XML names that contain a large number of colons could make the XML parser consume a high amount of RAM and CPU resources while processing (enough to be usable for denial-of-service attacks).
CVE-2018-5729	4.7 ( CVSS:3.0/AV:N/AC:L/PR:H/UI:N/S:U/C:L/I:L/A:L )	MIT krb5 1.6 or later allows an authenticated kadmin with permission to add principals to an LDAP Kerberos database to cause a denial of service (NULL pointer dereference) or bypass a DN container check by supplying tagged data that is internal to the database module.
CVE-2018-5730	3.8 ( CVSS:3.0/AV:N/AC:L/PR:H/UI:N/S:U/C:L/I:L/A:N )	MIT krb5 1.6 or later allows an authenticated kadmin with permission to add principals to an LDAP Kerberos database to circumvent a DN containership check by supplying both a "linkdn" and "containerdn" database argument, or by supplying a DN string which is a left extension of a container DN string but is not hierarchically within the container DN.
CVE-2019-1543	7.4 ( CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N )	ChaCha20-Poly1305 is an AEAD cipher, and requires a unique nonce input for every encryption operation. RFC 7539 specifies that the nonce value (IV) should be 96 bits (12 bytes). OpenSSL allows a variable nonce length and front pads the nonce with 0 bytes if it is less than 12 bytes. However it also incorrectly allows a nonce to be set of up to 16 bytes. In this case only the last 12 bytes are significant and any additional leading bytes are ignored. It is a requirement of using this cipher that nonce values are unique. Messages encrypted using a reused nonce value are susceptible to serious confidentiality and integrity attacks. If an application changes the default nonce length to be longer than 12 bytes and then makes a change to the leading bytes of the nonce expecting the new value to be a new unique nonce then such an application could inadvertently encrypt messages with a reused nonce. Additionally the ignored bytes in a long nonce are not covered by the integrity guarantee of this cipher. Any application that relies on the integrity of these ignored leading bytes of a long nonce may be further affected. Any OpenSSL internal use of this cipher, including in SSL/TLS, is safe because no such use sets such a long nonce value. However user applications that use this cipher directly and set a non-default nonce length to be longer than 12 bytes may be vulnerable. OpenSSL versions 1.1.1 and 1.1.0 are affected by this issue. Due to the limited scope of affected deployments this has been assessed as low severity and therefore we are not creating new releases at this time. Fixed in OpenSSL 1.1.1c (Affected 1.1.1-1.1.1b). Fixed in OpenSSL 1.1.0k (Affected 1.1.0-1.1.0j).
CVE-2019-1547	1.9 AV:L/AC:M/Au:N/C:P/I:N/A:N	Normally in OpenSSL EC groups always have a co-factor present and this is used in side channel resistant code paths. However, in some cases, it is possible to construct a group using explicit parameters (instead of using a named curve). In those cases it is possible that such a group does not have the cofactor present. This can occur even where all the parameters match a known named curve. If such a curve is used then OpenSSL falls back to non-side channel resistant code paths which may result in full key recovery during an ECDSA signature operation. In order to be vulnerable an attacker would have to have the ability to time the creation of a large number of signatures where explicit parameters with no co-factor present are in use by an application using libcrypto. For the avoidance of doubt libssl is not vulnerable because explicit parameters are never used. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL 1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s).
CVE-2019-1549	5.0 AV:N/AC:L/Au:N/C:P/I:N/A:N	OpenSSL 1.1.1 introduced a rewritten random number generator (RNG). This was intended to include protection in the event of a fork() system call in order to ensure that the parent and child processes did not share the same RNG state. However this protection was not being used in the default case. A partial mitigation for this issue is that the output from a high precision timer is mixed into the RNG state so the likelihood of a parent and child process sharing state is significantly reduced. If an application already calls OPENSSL_init_crypto() explicitly using OPENSSL_INIT_ATFORK then this problem does not occur at all. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c).
CVE-2019-1551	5.0 AV:N/AC:L/Au:N/C:P/I:N/A:N	There is an overflow bug in the x64_64 Montgomery squaring procedure used in exponentiation with 512-bit moduli. No EC algorithms are affected. Analysis suggests that attacks against 2-prime RSA1024, 3-prime RSA1536, and DSA1024 as a result of this defect would be very difficult to perform and are not believed likely. Attacks against DH512 are considered just feasible. However, for an attack the target would have to re-use the DH512 private key, which is not recommended anyway. Also applications directly using the low level API BN_mod_exp may be affected if they use BN_FLG_CONSTTIME. Fixed in OpenSSL 1.1.1e (Affected 1.1.1-1.1.1d). Fixed in OpenSSL 1.0.2u (Affected 1.0.2-1.0.2t).
CVE-2019-1552	3.3 ( CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N )	OpenSSL has internal defaults for a directory tree where it can find a configuration file as well as certificates used for verification in TLS. This directory is most commonly referred to as OPENSSLDIR, and is configurable with the --prefix / --openssldir configuration options. For OpenSSL versions 1.1.0 and 1.1.1, the mingw configuration targets assume that resulting programs and libraries are installed in a Unix-like environment and the default prefix for program installation as well as for OPENSSLDIR should be '/usr/local'. However, mingw programs are Windows programs, and as such, find themselves looking at sub-directories of 'C:/usr/local', which may be world writable, which enables untrusted users to modify OpenSSL's default configuration, insert CA certificates, modify (or even replace) existing engine modules, etc. For OpenSSL 1.0.2, '/usr/local/ssl' is used as default for OPENSSLDIR on all Unix and Windows targets, including Visual C builds. However, some build instructions for the diverse Windows targets on 1.0.2 encourage you to specify your own --prefix. OpenSSL versions 1.1.1, 1.1.0 and 1.0.2 are affected by this issue. Due to the limited scope of affected deployments this has been assessed as low severity and therefore we are not creating new releases at this time. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL 1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s).
CVE-2019-1559	5.9 ( CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N )	If an application encounters a fatal protocol error and then calls SSL_shutdown() twice (once to send a close_notify, and once to receive one) then OpenSSL can respond differently to the calling application if a 0 byte record is received with invalid padding compared to if a 0 byte record is received with an invalid MAC. If the application then behaves differently based on that in a way that is detectable to the remote peer, then this amounts to a padding oracle that could be used to decrypt data. In order for this to be exploitable "non-stitched" ciphersuites must be in use. Stitched ciphersuites are optimised implementations of certain commonly used ciphersuites. Also the application must call SSL_shutdown() twice even if a protocol error has occurred (applications should not do this but some do anyway). Fixed in OpenSSL 1.0.2r (Affected 1.0.2-1.0.2q).
CVE-2019-1563	4.3 AV:N/AC:M/Au:N/C:P/I:N/A:N	In situations where an attacker receives automated notification of the success or failure of a decryption attempt an attacker, after sending a very large number of messages to be decrypted, can recover a CMS/PKCS7 transported encryption key or decrypt any RSA encrypted message that was encrypted with the public RSA key, using a Bleichenbacher padding oracle attack. Applications are not affected if they use a certificate together with the private RSA key to the CMS_decrypt or PKCS7_decrypt functions to select the correct recipient info to decrypt. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL 1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s).
CVE-2019-15903	7.5 ( CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H )	In libexpat before 2.2.8, crafted XML input could fool the parser into changing from DTD parsing to document parsing too early; a consecutive call to XML_GetCurrentLineNumber (or XML_GetCurrentColumnNumber) then resulted in a heap-based buffer over-read.
CVE-2020-1967	5.0 AV:N/AC:L/Au:N/C:N/I:N/A:P	Server or client applications that call the SSL_check_chain() function during or after a TLS 1.3 handshake may crash due to a NULL pointer dereference as a result of incorrect handling of the "signature_algorithms_cert" TLS extension. The crash occurs if an invalid or unrecognised signature algorithm is received from the peer. This could be exploited by a malicious peer in a Denial of Service attack. OpenSSL version 1.1.1d, 1.1.1e, and 1.1.1f are affected by this issue. This issue did not affect OpenSSL versions prior to 1.1.1d. Fixed in OpenSSL 1.1.1g (Affected 1.1.1d-1.1.1f).

Solution

OpenSSL in SBR Carrier 8.5 has been upgraded to OpenSSL 1.0.2u.
OpenSSL in SBR Carrier 8.6 has been upgraded to OpenSSL 1.1.1g.
Other third party software in SBR Carrier has been upgraded to Kerberos 1.16.4, Expat 2.2.9, and OpenLDAP 2.4.50.

The following software releases have been updated to resolve this specific issue: 8.5.0-R17, 8.6.0-R12, and all subsequent releases.

This issue is being tracked as 1517427 .

Software releases or updates are available for download at https://www.juniper.net/support/downloads/ .

Workaround

There are no viable workarounds for these issues.

Severity Assessment

Information for how Juniper Networks uses CVSS can be found at KB 16446 [juniper.net] "Common Vulnerability Scoring System (CVSS) and Juniper's Security Advisories."

Modification History