Product Affected

This issue affects all versions of Junos OS Evolved.

Problem

An Incorrect Calculation vulnerability in the Layer 2 Control Protocol Daemon (l2cpd) of Juniper Networks Junos OS Evolved allows an unauthenticated network-adjacent attacker flapping the management interface to cause the learning of new MACs over label-switched interfaces (LSI) to stop while generating a flood of logs, resulting in high CPU usage.

When the issue is seen, the following log message will be generated:

op:1 flag:0x6 mac:xx:xx:xx:xx:xx:xx bd:2 ifl:13302 reason:0(REASON_NONE) i-op:6(INTRNL_OP_HW_FORCE_DELETE) status:10 lstatus:10 err:26(GETIFBD_VALIDATE_FAILED) err-reason 4(IFBD_VALIDATE_FAIL_EPOCH_MISMATCH) hw_wr:0x4 ctxsync:0 fwdsync:0 rtt-id:51 p_ifl:0 fwd_nh:0 svlbnh:0 event:- smask:0x100000000 dmask:0x0 mplsmask 0x1 act:0x5800 extf:0x0 pfe-id 0 hw-notif-ifl 13302 programmed-ifl 4294967295 pseudo-vtep underlay-ifl-idx 0 stack:GET_MAC, ALLOCATE_MAC, GET_IFL, GET_IFF, GET_IFBD, STOP,

 

This issue affects Junos OS Evolved: 

  • all versions before 21.4R3-S7-EVO, 
  • from 22.2 before 22.2R3-S4-EVO, 
  • from 22.3 before 22.3R3-S3-EVO, 
  • from 22.4 before 22.4R3-S2-EVO, 
  • from 23.2 before 23.2R2-S1-EVO, 
  • from 23.4 before 23.4R1-S2-EVO, 23.4R2-EVO.

 

This issue affects label-switched interfaces configured for VPLS. For example:

[routing-instances <name> instance-type vpls]
[routing-instances <name> protocols vpls]

 

Juniper SIRT is not aware of any malicious exploitation of this vulnerability.

This issue was seen during production usage.

Solution

The following software releases have been updated to resolve this specific issue: 21.4R3-S7-EVO, 22.2R3-S4-EVO, 22.3R3-S3-EVO, 22.4R3-S2-EVO, 23.2R2-S1-EVO, 23.4R1-S2-EVO, 23.4R2-EVO, 24.2R1-EVO, and all subsequent releases.

This issue is being tracked as 1802153 which is visible on the Customer Support website.

Note: Juniper SIRT's policy is not to evaluate releases which are beyond End of Engineering (EOE) or End of Life (EOL).

Workaround

There are no known workarounds for this issue.

Severity Assessment

Information for how Juniper Networks uses CVSS can be found at KB 16446 [juniper.net] "Common Vulnerability Scoring System (CVSS) and Juniper's Security Advisories."

Modification History

2026-01-14: Initial Publication

Related Information